Hubs

The Shimano HB-RS470 front disc brake hub features a Center Lock design, Internal Grease Sleeve, and Cup and Cone Bearing technology. - The Center Lock system makes for easy rotor installation with a quick and secure spline mount and lock ring - Hub features internal o-rings and a grease sleeve that helps maintain grease levels and increases service life

The DH-UR700-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch quick-release wheels. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Angular contact bearings - Compact & lightweight - Low rotational resistance - Durable sealing performance

With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance

From World Cup DH runs to sessioning your local trails, Shimano's Saint front hub is the answer. Centered around an oversize hub shell and a 20mm thru-axle, the Saint Front Hub is rock solid, with beefy flanges and Shimano's angular contact bearings, which balance destructive impacts from any direction. And, Shimano's Centerlock Rotor Mount makes installing rotors a breeze.

From World Cup DH runs to big hits on your local trails, Shimano's Saint rear hub is the answer. Its overbuilt features, like a 12mm thru-axle, beefy flanges, and impact-resistant angular contact bearings, give you the confidence you need to go big and stick the landing. The freehub uses micro-ratchet construction for fast engagement so you can sprint out of the corners and pick up speed for that next double. It's compatible with 8-,9-, and 10-speed drivetrains and uses Shimano's Centerlock Rotor Mount to keep rotor swaps easy.

- Compatible with 26 to 28" wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output

Shimano's Tiagra Front Hub is the durable, lightweight heart of a fast everyday front wheel. Super-polished cups and cones house ultra-smooth stainless steel bearings to minimize rolling resistance, and the hub's oversize aluminum shell builds into a stiff, responsive wheel. Adding to that, Shimano's labyrinth seals shut out dust, dirt and water for phenomenal durability.

Built with labyrinth and contact seals to remain silky smooth in dusty, muddy, wet, and sandy conditions, and with highly refined cup and cone surfaces, the XTR front hub is perfect for custom MTB wheel builds. - Hole count: 28

Built with labyrinth and contact seals to remain silky smooth in dusty, muddy, wet, and sandy conditions, and with highly refined cup and cone surfaces, the XTR front hub is perfect for custom MTB wheel builds. - Traditional flange

Shimano's ZEE Rear Freehub is a quick engaging, smooth-running hub that doesn't drain the bank account. It features quality sealing, adjustable angular-contact bearings, and rotates on an extra-stiff one-piece rear axle with integrated cone construction. It's Center Lock compatible and is available in 135, 142 and 150mm configurations.

Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes

Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Fully convertible with tool-free end caps - BOOST variants - 24, 28 or 32 spoke holes

Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 716 front hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. TPlus, tough cartridge bearings roll smooth for the long haul.

SRAM's Predictive Steering Hub is a dedicated hub interface for the inverted RockShox RS-1 fork. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions and the oversize, solid-aluminum Torque Tube axle delivers extreme strength and stiffness. It's equipped with standard 6-bolt rotor mounts and is not convertible to other axles.

The super fast engagement of Vault, now available for your custom wheel builds. Available in Boost and non-Boost and Shimano or XD cassette bodies. An oversized hub shell increases torsional and lateral stiffness, while proven 6902 bearings were selected due to their large ball diameter and durability. A 60-tooth drive ring alternately engages six double tooth pawls, giving you 3-deg engagement for near-instant power transfer. Wide bearing placement was designed to decrease load on the bearings, improving lifespan. Protecting the internals are low-drag labyrinth seals designed specifically for the Vault hubs. Finish it off with tool-free endcap swaps and you have a hub that not only moves faster but adapts faster.

- Adjustable double sealed cartridge bearings and labyrinth seals - Wide canted flanges build a no dish wheel - Large 8mm bolts and knurled washer face for maximum hold - Accepts 24tpi BMX freewheels. 300g - 32-hole - Made in USA

- Aluminum hubs - Sealed bearing - Black - 6-bolt disc rotor

• Sealed cartridge bearings • High flange design • Aluminum hub body • 120mm hub spacing • Fix/Fix hub threading • 32, 36, 48-hole spoke drilling • Bolt-on 3/8-inch axle • Black or silver

- Press fit designed to work the hub's non-drive side collar.

The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. Same Clutch coaster hub you’ve come to love, but with a few upgrades. Features: - Maximum strength axle design - Super-durable bearing arrangement throughout - 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required. - Super-durable drag mechanism design - Crankflip ready Improvements Over the Clutch V1: - 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability - Improved clutch engagement - Improved manufacturing precision throughout - More slack than the V1 hub - All-new durable proprietary plastic spec for the removable hub guard Specs: - 36-hole, 2014-T6 aluminum shell - 9T Driver - Left or right hand drive - 22 oz / 623g Guard Options: - Plastic hub guard included (but optional to use) - Alloy hub guard also available

The Vandero hub is back and better than ever. This new PRO version of the Vandero is a precision sealed hub with proven in-bound 3/8-inch axle bolts and two plastic guards. Features: - 7075-T6 aluminum hub shell - 6903RS sealed cartridge ball bearings - Precision bored fully concentric bearing seats for a smoother spin and prolonged bearing life - 17mm 7075-T6 aluminum axle with steel helicoil thread inserts - 3/8-inch heat-treated chromoly axle bolts with 17mm wrench flats and a 6mm hex slot - Weight: 11.2oz - Replaceable plastic hub guards included

DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these 6-bolt disc hubs will roll for thousands of nearly frictionless miles.

DT's 350 MTB rear hub offers top-end performance for all your riding needs. DT Swiss' Ratchet freewheel system provides precise engagement, high load capacity, and reliability. The Ratchet System driver is extremely durable and can be easily serviced—without tools—in minutes thanks to it's press fit assembly. The press fit assembly also allows the hub to work with a wide array of axle configurations; by simply swapping out the tool-free end caps (sold separately), you'll be able to enjoy the legendary DT Swiss quality on almost any bike. • Accepts 6-bolt rotors

DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these Center Lock disc hubs make rotor installation and removal super fast.

DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, DT's legendary Ratchet System ensures precise engagement no matter how hard you stomp on the pedals. Plus, these Center Lock disc hubs make rotor installation and removal super fast.

The 350 road hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these hubs will roll for thousands of nearly frictionless miles.

The 350 road hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these hubs will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement no matter how hard you stomp on the pedals.

DT Swiss' 350s Straightpull Center Lock hub hits the sweet spot between low weight and reliability. The straight pull spoke design makes for a stiff, responsive mountain bike wheel that will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. And the Center Lock attachment makes installing and removing disc rotors simple and fast.

- USB and Cult ceramic renewing kits can be used to upgrade Campagnolo wheels that come stock with stainless steel bearings - Kit includes (2) each of dust seals, hub cones, hub cups, and ceramic or steel ball bearings

Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset. Product details - Rapid Drive 54 hub quickly and efficiently transfers effort into forward momentum - Wheels are upgradeable to 108 points of instant engagement - Bontrager rear hub for use with 148mm dropouts - Flange diameter: 58mm - NDS flange offset: 35.5mm - DS flange offset: 21.5mm - 28 hole, 6-bolt rotor