Cables & Housing

- Great for center-pull cantilever brake setups - Fits threadless fork steerer tubes - Includes barrel adjuster - 24mm cable stop drop - AL6061-T6 alloy construction

Aluminum, Lightweight, Lubricated An alternative to traditional compressionless housing, this system is made of nesting alloy pieces that protect the liner. Although this housing is typically more expensive, it has several advantages including increased flexibility, reduced weight and increased durability. Both shift and brake housings use identical Slick-Lube liners and interconnecting alloy pieces. - Slick-Lube liners reduce friction and protect against corrosion - Includes four 1600mm liners

Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose

- Nano-polished ultra slick extruded cables are non-coated for ultimate smoothness and durability - Kevlar reinforced compressionless linear strand housing with slick lube liner improves lever feel - Lightweight alloy end caps and cable tips - Compatible with Shimano/SRAM road and MTB brake levers Contents: - 1x - 1.5mm x 1350mm cable - 1x - 1.5mm x 2350mm cable - 3m - Compression-less 5mm housing - 2x - EZ-bend housing segments - 6x - Black alloy end caps - 2x - Black alloy end caps for small frame fittings - 2x - Black alloy cable tips - 2x - Black rubber cable donuts - 2x - Black rotating hooks

- 4mm compressionless housing - Housing Length: 50m - Shift Housing Diameter: 4mm

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.

Jagwire's Universal Cable Tips are crimp-on aluminum caps for finishing the ends of 1.8mm and smaller diameter cables. They prevent the cables from fraying and come in colors to add style to your ride. Choose from two color mixes in bottles of 30.

- Stainless steel shifter cable - PTFE-coated for reduced friction - Length: 2000mm - 1.1mm compatible with Shimano, SRAM, and Campagnolo shifters - 1.2mm compatible with Shimano and SRAM shifters

- Use: S.I.S. - Length: 30mm

- MTB or Road - Stainless steel - 1.5mm diameter - 2000mm length

- 50 feet (15.2 meters) length - 5mm diameter cable housing - For brake cables

- 50 feet (15.2 meters) length - 5mm diameter brake cable housing

- Replacement link wire for cantilever brakes

- Routes cables underneath the bottom bracket - Will not rust or corrode

Jagwire's Sport Slick Galvanized Shift Cable is a fine shift cable made of galvanized steel for optimum shifting performance and durability.

Jagwire's Universal Sport Brake XL Cable Kits are the perfect way to enhance your braking performance while adding a little style to your bike, too. Compatible with both mountain and road brakes, and in an extra-long size, the slick stainless cables provide smooth, powerful braking. And with the housing and all the needed parts included, these cable kits are easy to install and ready to deliver years of smooth positive braking.

Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Tektro brakes and includes enough hardware for one bicycle.

Extend housing runs using these double-ended junction end caps.

Want the best combination of braking power and cable strength? Box Two Linear Brake Cable Kits start with custom housing that includes stainless steel mesh-wrapped linear wires for The inner cable wires are stainless steel, so they won’t rust over time. Each cable kit includes 63 inches of Linear housing, a BMX-race specific stainless steel cable wire, two black brass ferrules, and two black alloy cable end caps. FEATURES - 63 inches of Linear housing - BMX-race specific stainless steel cable wire - Two black brass ferrules - Two black alloy cable end caps - Stainless steel cable wires SPECIFICATIONS - Weight: 24 grams / 0.84 ounces

KS Dropper Post Service Parts

EPS cable guide magnets are required for internally routing EPS wires. - Includes: wire, metal cable, and magnet

- For mountain bike cable-actuated brakes - 1.5mm x 3000mm - Stainless steel

Alleviate brake cable alignment and tangles with Origin-8's Rear-Mount Cable Hanger. Made from forged aluminum, it mounts to most brake bridge mounting holes and is great for solving tricky cantilever brake set up problems. - Forged aluminum construction - Mounts to most frame mounting holes - Great for tricky cantilever brake setups - Lightweight design

Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.5mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant

Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Frame Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.

Road Pro Brake kits offer enhanced performance and style. Designed to work with and match Jagwire's Pro Shift kits, the Pro polished brake cables combined with their Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all needed parts included, Jagwire's Road Pro Brake kits are easy to install. - Pro level polished cables combined with Slick-Lube, Kevlar reinforced housing enhance braking performance - All parts needed for a complete brake cable and housing install on road bikes are included - Kits provide longer housing and cables for large frame with full housing or mechanical disc brakes

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. Compatibility - HFA207: Fits SRAM Guide R/RS/RSC/Ultimate and Avid Juicy 5/7/Carbon/Ultimate - HFA208: Fits SRAM DB5 Guide and Level and Avid Elixir, Trail, and XX - HFA209: Fits SRAM Guide and Level and Avid Code, DB, Elixir, and Juicy - HFA210: Fits SRAM Level TLM/Ultimate and 2018 Code R/RSC - HFA213: Fits SRAM RED eTap HRD and S900 Aero HRD

Precision-machined 5mm ID brass cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables. - Inside diameter: 5mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: brass - Bottle of 50pcs